When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.
Until recently, security cameras typically came with numerous attached wires and cables, posing installation challenges for many users. However, with technological advancements permeating nearly every sector, these wired security cameras have increasingly been replaced by more convenient wireless alternatives.
If you’ve invested in a wired security camera but wish to convert it into a wireless model, the following steps will guide you.
Recommended Steps for Making a Wired Security Camera Wireless
Step 1. Look Out for the Video ‘Out’ Jack
Inspect the back of the camera to locate the ‘video out’ jack, usually marked with a yellow ring for easy identification.
Step 2. Connect the Video Cable to the Security Camera
Carefully connect one end of the video cable to the camera’s ‘video out’ jack and the other to the ‘video in’ jack of the wireless transmitter. Ensure both connections are secure, noting that these jacks are typically coated with yellow and clearly labeled for convenience.
Step 3. Switch On the Camera and Transmitter
Activate both the camera and the transmitter. At this stage, the camera should be capable of sending video signals and images to the transmitter, which then broadcasts these signals to the receiver via radio frequency.
Step 4. Establishing a Connection with the Monitor
Proceed by connecting the wireless receiver’s ‘video out’ jack to the ‘video in’ jack of the monitor.
The receiver’s jack is most commonly located on the back of the device, but configurations can vary depending on the manufacturer. For monitors, the jack might be found on the sides, whereas television monitors typically have this jack positioned at the back.
Step 5. Turning On the Monitor and Receiver
After completing the connection process, power on both the monitor and the receiver. Ensure the monitor is set to the correct video channel, labeled as ‘Input’ or ‘Video’ on the device.
Step 6. Tuning the Wireless Receiver
Adjust the wireless receiver according to the user manual’s instructions until it synchronizes with the wireless video transmitter.
Once properly tuned, you should be able to view the camera’s transmitted images on the monitor’s screen.
Summing It Up
This guide outlines the straightforward steps for converting a wired security camera into a wireless system, enhancing its flexibility and ease of installation. Keep following us for the latest updates and insights on your preferred security devices and products.
See Also
Follow us