How to Set Up Arlo Essential Camera

When you purchase through links on our site, we may earn an affiliate commission. Here’s how it works.

Setting up your Arlo Essential camera is a straightforward process. The steps below will guide you from powering on the camera to its final synchronization.

Recommended Steps for How to Set Up the Arlo Essential Camera

How to Set Up Arlo Essential Camera

How to Set Up Arlo Essential Camera – Recommended Steps

Step 1. Getting Started

Unbox the Arlo Essential camera package and familiarize yourself with all the instructions in the user manual. This will acquaint you with its basic features and controls. Furthermore, download and install the Arlo app on your smartphone.

After downloading, create an app account, which will guide you through the steps to add the device.

The Arlo Essential camera requires charging first. Begin by opening the micro USB charging port cover on the camera. Then, connect the provided micro USB cable to the camera and the other end to a USB charging source or an AC power adapter. The battery will automatically charge from here. Wait for the blue LED light to indicate that the Arlo Essential camera is fully charged.

Step 2. Syncing the Device

The device comes in a ‘Shut Down Mode’ to conserve battery charge before installation.

Wake the camera by pressing the SYNC button at the bottom of the device for 1-2 seconds. The camera will wake up, indicated by a flashing blue LED light.

Follow the instructions provided in the Arlo app to add the device. Ensure the battery is recharged before proceeding, or the device will not respond. The LED light on the camera indicates its charging status, syncing with Wi-Fi, and firmware updates:

  • Slow blinking blue: The camera is pairing with a Wi-Fi network.
  • Fast blinking blue: The camera has successfully paired with a Wi-Fi network.
  • Blinking amber: The camera is out of range of the Wi-Fi network, a connection error occurred during pairing, or the battery charge is too low (15% or less).
  • Alternating blue and amber: The device is undergoing a firmware update.

Follow the Arlo app’s instructions to connect the camera to the Home Wi-Fi network. Refer to the above LED light status details to ensure a secure and successful connection.

Step 3. Mounting the Camera to the Desired Location

Decide upon the desired location for its placement, ensuring it offers a complete field of view according to your needs and preferences and is supported by strong Wi-Fi coverage.

Use the Arlo app to check Wi-Fi connectivity. Then, proceed with mounting the Arlo Essential camera by following these steps:

  • Position the mount and secure it with the provided screws. Use drywall anchors where required.
  • Attach the camera to the mount by aligning it with the two mounting holes (rear and bottom part).
  • Adjust the device to cover your security needs.
  • Your Arlo Essential camera is now successfully set up.

Step 4. Testing the Camera

It’s recommended to test all features and controls of the camera beforehand. In the Arlo app, navigate Settings > My Devices > Select Camera > Device Utilities > Motion Detection Test.

Make movements around the camera to see if the LED light blinks amber. Adjust the motion sensitivity levels using the slider in the app as needed.

Adjust the camera’s angle and position to achieve desired results with motion detection and other features.

To adjust camera positioning for optimal recording, streaming, or motion detection, use the Arlo app by following:

Settings > My Devices > Device Utilities > Camera Positioning

You can arm or disarm the motion detection features as needed.

Bottom Line for How to Set Up Arlo Essential Camera

The process of setting up the Arlo Essential camera is relatively straightforward. Familiarize yourself with all its controls and features for a smoother setup experience.

If you encounter any issues during the connection process, refer to the user manual or

contact Arlo customer support for assistance.

See Also

Why is my Arlo camera not recording

Follow us

Leave a comment

Your email address will not be published.


*